6.5TD C/K Trucks  >  ECONOMY SERIES PMDs, Heat Syncs and Resistors  >  ECONOMY SERIES PMD/FSD Driver Module

Brand New SSD ECONOMY SERIES PMD/FSD Module w/hardware and our NEW Heat transfer pad.

Brand new SSD ECONOMY SERIES PMD/FSD Module for all 94+ 6.5 Turbo Diesels. Freshest stock available, we receive new shipments almost daily from the manufacturer.

This electronic device was originally  mounted on the side of the DS Fuel Injection pumps for the General Motors Diesel applications. Many features were improved upon from the original OE design. Components were changed to adhere to the harsher environments that caused the OE design to fail.

The PMD is the small black box the size of a deck of playing cards on the side of your injection pump. It is a signal amplifier that powers the fuel solenoid on your injection pump. In stock location, it is prone to premature failure. I strongly suggest not re-installing it in the stock location. Mount to a remote cooler such as our FSD Heat-Sync II^TM. Check our products page for more info.

If replacing the PMD, don't forget the resistor. PMD's do not come with one and one is required. If you omit the resistor, your PCM will default to a #1 resistor setting to keep you running. But, performance and mileage will suffer greatly. I suggest a #9 resistor in all applications. See the products page for more info.

Included in the box: 1) new ECONOMY SERIES PMD, grade 8 PMD mounting hardware, NEW heat transfer pad, and a tube of dielectric grease for the pins. Detailed installation instructions are also included.

NOTE:

This is a light duty version of our famous ssd-020SS PMD

For our Premium "made in USA" version, purchase ssd-020SS